Creality
K2 Plus
350 mm cube with an active chamber heater listed up to 60 °C. Creality names ABS and ASA, and lists CFS as compatible.
Compare with H2DDirectory / Bambu Lab
Bambu Lab H2D
Dual-nozzle enclosed printer with 65 °C active chamber heating. Bambu Lab lists ABS and ASA, including fiber-reinforced grades, as supported.
Published specs
| Listed price | US$1,549 · USD |
|---|---|
| Price source | Bambu Lab Asia store, Asia store, including the 200–240 V option named for Singapore |
| Price checked | 23 October 2026 |
| Build volume | 325 × 320 × 325 mm (33.8 L) |
| Enclosure | Fully enclosed |
| Chamber heating | Active heated |
| ASA/ABS label | Active chamber listed |
| Max nozzle | 350 °C |
| Max bed | 120 °C |
| Filtration | G3 pre-filter, H12 HEPA, granulated coconut-shell activated carbon |
| Multicolour | Included · Dual-nozzle multi-material included; AMS, AMS 2 Pro, and AMS HT optional |
| Availability note | Unknown |
| Last checked | 23 October 2026 |
A dashed Unknown mark means the manufacturer pages fetched for this entry did not state that value.
Notes from those pages
The H2D entry uses the Bambu Lab tech-spec page for temperatures, filtration, volume, and the filament list. The Asia store is the price source because it names a 200–240 V option for Singapore.
The Asia store displays 'From 1,549 USD', tax excluded. The page lists separate H2D, H2D AMS Combo, and H2D Laser Full Combo configurations, and a 200–240 V option for Singapore, Thailand, Malaysia, China Hong Kong, and China Macao. The stored amount is that starting price, not a confirmed single-SKU checkout total. Shipping is extra. US store pages seen during the same research pass did not agree with each other, so no US price is stored.
Figures stored here are the tech spec's single-nozzle volume, 325 × 320 × 325 mm. The same tech spec lists dual-nozzle printing at 300 × 320 × 320 mm and a total volume for two nozzles of 350 × 320 × 320 mm. The Asia store spec table instead lists dual-nozzle printing at 300 × 320 × 325 mm and a total of 350 × 320 × 325 mm. A store footnote says the 350 × 320 × 325 mm volume uses identical filaments in both nozzles.
The tech spec lists the chassis and shell as aluminum, steel, plastic, and glass, and lists active chamber heating. A door sensor is also listed.
The tech spec has a chamber-temperature-control row: active chamber heating supported, maximum 65 °C. The Asia store repeats '65 °C active chamber heating'.
The Asia store lists dual-nozzle multi-material printing as a product feature. Its FAQ says the first-generation AMS is plug-and-play, AMS lite is not supported, and the maximum simultaneous connection is 4 AMS 2 Pro units plus 8 AMS HT units. In the extreme case the FAQ describes, with every AMS on one hotend and an external spool on the other, Bambu Lab says the machine can support up to 25 colors.
A separate store note says an air purifier for laser work is optional equipment. The G3, H12, and carbon filter grades above come from the printer tech spec, not from that optional laser purifier.
Why this ASA/ABS label: The tech spec lists ABS, ASA, and carbon or glass-fiber reinforced ABS and ASA as supported. It also lists a fully described shell, active chamber heating to 65 °C, a 350 °C nozzle, and a 120 °C heatbed. That matches this directory's active-chamber label.
From the spec sheet
- Active chamber heating is listed, with a maximum of 65 °C.
- ABS and ASA, including fiber-reinforced ABS and ASA, are on the supported-filament list.
- Maximum nozzle temperature is 350 °C and maximum heatbed temperature is 120 °C.
- Single-nozzle build volume is 325 × 320 × 325 mm.
- Air purification is listed as a G3 pre-filter, an H12 HEPA filter, and granulated coconut-shell carbon.
Limits in the spec sheet
- The Asia price is a 'from 1,549 USD' figure, tax excluded, not one confirmed checkout total.
- Dual-nozzle volume is smaller than the single-nozzle volume, and the tech spec and the store table disagree on the dual-nozzle Z dimension (320 mm versus 325 mm).
- AMS units are optional. The H2D box table shows AMS 2 Pro only on the AMS Combo column.
Sources
- bambulab.com https://bambulab.com/en/h2d/tech-specs
- asia.store.bambulab.com https://asia.store.bambulab.com/products/h2d
- bambulab.com https://bambulab.com/en-us/h2d
Related listings
All printersQIDI
X-Max 3
Large enclosed printer with independent chamber heating listed at 65 °C. QIDI says the X-Max 3 has been discontinued.
Compare with H2DQIDI
Plus4
Enclosed printer with a second-generation chamber heater listed up to 65 °C. QIDI says the Plus4 has been discontinued.
Compare with H2D